Product Description

DC40H Series

Product Appearance 

Specifications

NO.	Item	Specs
1	Dimension and weight	84.5mm*61.8mm*43.8mm; 220g
2	Installation dimension	84.5mm*65mm*46mm;
3	External diameter of outlet	8MM
4	External diameter of inlet	11MM
5	Driving mechanism	Brush-less, magnetic isolated design
6	Material of pump shell	ABS,PES/SPS/PPS/PA66+30%GF (Optional)
7	Condition of use	Can continuously work, submersible or land use (not self-priming)
8	Suitable medium	Water, oil, or normal acid/ alkaline liquids (Pre-test needed for special liquid)
9	Max working temperature	60℃
10	Power consumption	2.5W~28.8W
11	Rated voltage	12Vdc or 24Vdc
12	Working voltage range	5Vdc ~ 12Vdc(Max 14v) or 5Vdc ~ 24Vdc(Max 26v)
13	Max load current	1.2A
14	Max horizontal flow rate	7.5L/MIN
15	Max static lift	11M
16	Noise class	<40dB
17	Waterproof class	IP68(suitable for submersible installation)
18	Life span	Can be more than 30,000hrs
19	Power supply	Suitable for solar panel, batteries, adapter or other power source
20	Protection function	dry-run protection, stuck protection(customized function)
21	Power regulation function	Speed can adjustable by PWM signal, 0~5V analog signal or potentiometer (customized function)
22	Feature	small size with high efficiency,maintenance-free Use ceramics shaft and carbon fiber sleeve Completely water proof (IP68) Brush-less dc control without pollution, long life span OEM and ODM service accept Offer Pump related control system design

Small size, high efficiency, maintenance-free, low consumption, strong anti-jamming ability, stable performanceFeatures

• Brushless with no pollution, adopts high-performance ceramics shaft and high-precision carbon fiber sleeve together (stainless steel shaft optional for reducing cost)long life span
• Stator and control circuits are completely sealed by epoxy resin completely separated with rotor, waterproof, avoided water-leakage problem which long exists in normal DC motor pump products
• Protection functions can be customized such as lock protection, dry-run protection and so on.
• Wide range of working voltage; parameters can be adjustable, e.g. 12VDC pump can have lift of 1m and lift of 3m with the same pump body.
• Reduced the mortality to 0.05% after long-time study by R&D dep.
• Lift of pumps can be doubled when they are connected in series
• Suitable for submersible installation or land use (should be located below fluid level)
• Offer ODM serve for pump and other controller system

 

 

Electrical parameters (only for reference,parameters can be customized for specific requirements)

Model No.	Voltage	Max load current	Max static lift	Max flow rate	Power consumption
	V(dc)	A	M	L/H	w
DC40H-1240	12	0.50	4.0	270	6.0
DC40H-1265	12	1.2	6.5	360	14.4
DC40H-1890	18	1.20	9.0	420	21.6
DC40H-2490	24	0.90	9.0	420	21.6
DC40H-24110	24	1.20	11.0	450	28.8
NOTE	Information including continuous working time, working temperature and medium is required to be pre-confirmed with professionals; pump cannot work with high temperature or corrosive fluids. When pump is connected into circulation system, load current will be reduced to 70~85% of Max working current (opening outlet current). The head means the Max vertical lifting height of water,the flow is 0L/MIN@max head. The max flow rate means flow rate with no lifting height(according to the curve bellow)

 

Flow rate-lift Curve

 

Dimensions of  pump

Selection guide

Model	Voltage (DC)	Current range	Max lift	Max flow	Inlet Dimension	Outlet Dimension	Speed regulation function	Dry-run / Lock protection
DC30A	5~12V	0.1~0.35A	3m	4L/MIN	8mm	8mm	customized	Optional
DC40	6~24V	0.15~1.2A	8m	11L/MIN	14mm	10mm	PWM/0~5V/manual	Optional
DC40A	6~24V	0.15~1.2A	6m	14L/MIN	14mm	14mm	PWM/0~5V/manual	Optional
DC40C	6~24V	0.15~1.2A	6m	15L/MIN	1/2’’ thread	1/2’’ thread	PWM/0~5V/manual	Optional
DC40F	6~24V	0.15~1.2A	6m	16L/MIN	1/2’’ thread	1/2’’thread	PWM/0~5V/manual	Optional
DC40H	6~24V	0.15~1.2A	11m	7.5L/MIN	11mm	8mm	PWM/0~5V/manual	Optional
DC50	6~24V	0.15~3.8A	7m	44L/MIN	22mm	22mm	PWM/0~5V/manual	Optional
DC50A	6~24V	0.15~3.8A	5m	60L/MIN	27mm	27mm	PWM/0~5V/manual	Optional
DC50B	6~24V	0.15~3.8A	13m	30L/MIN	22mm	22mm	PWM/0~5V/manual	Optional
DC50C	6~24V	0.15~3.8A	6.5m	42L/MIN	1/2’’ thread	1/2’’ thread	PWM/0~5V/manual	Optional
DC50D	6~24V	0.15~3.8A	6.5m	42L/MIN	20mm	20mm	PWM/0~5V/manual	Optional
DC50E	6~24V	0.15~3.8A	15m	25L/MIN	1/2’’ thread	1/2’’ thread	PWM/0~5V/manual	Optional
DC50F	6~24V	0.15~3.8A	15m	25L/MIN	1/2’’ thread	1/2’’ thread	PWM/0~5V/manual	Optional
DC50G	6~24V	0.15~3.8A	18m	10L/MIN	14mm	8mm	PWM/0~5V/manual	Optional
DC50K	6~24V	0.15~3.8A	14m	25L/MIN	14mm	14mm	PWM/0~5V/manual	Optional
DC50W	24V	1~3.8A	wave	28000L/H	Submersible	58mm	Variable Frequency	Optional
DC50Q	24V	1~3.8A	5m	5000 L/H	1’’ thread	1’’ thread	Variable Frequency	Optional
DC60Q	24v	1-5A	5m	10000L/H	1.2’’ thread	1.2’’ thread	Variable Frequency	Optional
Note: 1, lift and flow rate of product can be customized 2, dimension of inlet/outlet, speed adjusting method and control system can be customized. 3,Food grade and mute pump can be customized.

Payment Terms︰ TT/PAYPAL/WESTERN UNION

Product Image