Three-phase dc pump brushless dc pump ZKSJ DC50A

Three-phase dc pump brushless dc pump  ZKSJ DC50A

Model No.︰DC50A

Brand Name︰ZKSJ

Country of Origin︰China

Unit Price︰-

Minimum Order︰-

Inquire Now

Product Description

Specifications

NO. Item Specs
1 Dimension and weight 115.9mmx95.5mmx69.3mm;480g
2 External diameter of outlet 27mm
3 External diameter of inlet 27mm
4 Driving mechanism Brush-less, magnetic isolated design
5 Material of pump shell ABS,PES/SPS/PPS/PA66+30%GF (Optional)
6 Condition of use Can continuously work, submersible or land use (not self-priming)
7 Suitable medium Water, oil, or normal acid/ alkaline liquids
(Pre-test needed for special liquid)
8 Max working temperature 60℃(for T sub-series) or 100℃(for S/A sub-series)
9 Power consumption 2.5W~48W(for T sub-series) or 2.5W~86.4W(for S/A sub-series)
10 Rated voltage 12Vdc or 24Vdc
11 Working voltage range 5Vdc ~ 14Vdc or 5Vdc ~ 26Vdc
12 Max load current 2.0A (for T sub-series) or 4.5A(for S/A sub-series)
13 Max horizontal flow rate 52L/MIN(for T sub-series) or 60L/MIN(for S/A sub-series)
14 Max static lift 3.5M(for T sub-series) or 5M(for S/A sub-series)                                   
15 Noise class <40dB
16 Waterproof class IP68(suitable for submersible installation)
17 Life span >30,000hrsIP68(suitable for submersible installation)
18 Power supply Suitable solar panel, batteries, adapter or other power source
19 Protection function dry-run protection, lock protection(customized function)
20 Power regulation function Speed adjustable by PWM signal, 0~5V analog signal or potentiometer (functions are optional for customization)
22 Feature
  • small size with high efficiency,maintenance-free
  • Use ceramics shaft and carbon fiber sleeve
  • Completely water proof (IP68)
  • Brush-less dc control without pollution, long life span
  • OEM and ODM service accept
  • Offer Pump related control system design

 

Pump Structure

Electrical parameters (only for reference,parameters can be customized for specific requirements)

​​

Model No. Voltage Max load current Max static lift Max flow rate Power consumption
  V(dc) A M L/H w
DC50A-1225T 12 2.0 2.50 2000 24
DC50A-1225S
DC50A-1225A
DC50A-1235S 12 3.80 3.50 3000 45.6
DC50A-1235A
DC50A-2435T 24 2.0 3.50 3000 48
DC50A-2435S
DC50A-2435A
DC50A-2450S 24 3.60 5.00 3600 86.4
DC50A-2450A
    NOTE
  •   Information including continuous working time, working temperature and medium is required to be pre-confirmed with professionals; pump cannot work with high temperature or corrosive fluids.
  •   When pump is connected into circulation system, load current will be reduced to 70~85% of Max working current (opening outlet current).
  •   The head means the Max vertical lifting height of water,the flow is 0L/MIN@max head.
  •   The max flow rate means flow rate with no lifting height(according to the curve bellow)

 

Difference between 2phase & 3phase brushless DC pump

   2phase 
(T sub-series)
 Hall sensor driving, circuit board should be placed inside pump body
   3phase
(S/A sub-series)
  • NOTE that 3phase dc is completely different with 3phase AC; 3phase DC means 3 pairs of magnetic polarity & sensor-less, power supply  the same with common DC pump
  • Intelligent program-driving, sensor-less, circuit outside of pump body (main factor that pump can be high-temperature resistant)
  • Speed adjustable by PWM, 0~5V signal or potentiometer(optional)
  • Lock protection,reverse-connected protection, over-vol.&over-current protection,
  • Soft start, no current impact, can be contact directly with solar panel


 

                   
Potentiometer Speed adjusting connection:
Contact the red and black wire to both ends of potentiometer(variable resistor),then contact the yellow wire to the middle of potentiometer,Speed canbe changed by turning the potentiometer. Potentiometer speed adjusting is the same with VR speed adjusting(Remove the potentiometer and contact the speed adjusting wire like VR speed adjusting connection bellow).
PWM(50-800HZ/Amlitude 5V) or VR(0-5V) Speed adjusting connection:
Contact the yellow wire to the control system's speed control signal output interface(PWM or VR) and contact the black wire to the ground lead in the control system.hang the red wire on the air.

Flow rate-Head Curve 

Dimensions of pump

DC50A Series

Product Appearance


          T sub-series(2phase)                 S sub-series(3phase)                A sub-series(3phase)

 

Payment Terms︰ TT/PAYPAL/WESTERN UNION