Intelligent DC Wave maker
Features
- With 5 modes：Fixed Stream Mode (8 Levels), Stream & Wave Making Mode (8 Levels), Classic Wave Mode (15 Levels), Feed Mode and Night Mode.
- With SIX-Pole Intelligent DC three-phase drive (without sensor),
- Low voltage(DC24V) operation ,Safe, Long life expectancy and low noise.
- With Ceramic shaft & carbon fiber shaft sleeve to make sure the motor’s long expectancy.
- Very easy & convenient to use the controller
- Streams and wave can be adjusted easily
- Suitable for fresh water and Salt water
Technical Data
| Model |
DC50W-25 |
DC50W-40 |
DC50W-60 |
DC50W-80 |
| Flow rate |
10000L/H |
15000L/H |
22000L/H |
28000L/H |
| Max Consumption |
25W |
40W |
60W |
80W |
| Min Consumption |
6W |
6W |
10W |
10W |
| Power supply |
DC 24V |
| Dimension |
137*104*96.5 |
| Outlet |
58MM |
| Optional Holder |
Magnet/Rubber Foot |
Instructions (How To Use)
1) Fixed Stream Mode: Press the key “Model” till the indicator screen shows the first number “1”.When the number “1” comes out, that means you have chosen Fixed Stream Mode successfully. And then you can press the key “Speed” to control the flow rate. There are 8 levels for your option. When the indicator screen shows the number “11”, that is the minimum flow rate. When the indicator screen shows the number “18”, that is the maximum flow rate.
2) Stream & Wave Making Mode: Press the key “Model” till the indicator screen
shows the first number “2”.When the number “2” comes out, that means you have
chosen Stream & Wave Making Mode successfully. And then you can press the key
“Speed” to control the flow rates & waves. There are 8 levels for your option.
3) Classic Wave Mode: Press the key “Model” till the indicator screen shows the first number “3”.When the number “1” comes out, that means you have chosen Classic Wave Mode successfully. And then you can press the key “Speed” to control the waves. There are 15 levels for your option. When the indicator screen shows the number “31”, that is the minimum wave length. When the indicator screen shows the number “3F”, that is the maximum wave length.
4) Feed Mode: Press the key “Feed” till the indicator screen shows the number
“49”. When the number “49” comes out, that means you have chosen Feed Mode
successfully. And then the wave maker will stop working for your feeding fishes.
Meantime, the indicator screen starts the countdown when it shows the number
“49”. The countdown is 10 minutes. When the screen shows the number “40”, that
means the countdown is over and the wave maker restarts its working
immediately.
5) Night Mode：In the night，when the indicator screen shows the number
“00”, the motor starts its Night Mode and the streams will be very soft.
