|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
DC12v/24v solar hot water circulation pump ZKSJ DC50C
|
|
| Model No.︰ | DC50C |
| Brand Name︰ | ZKSJ |
| Country of Origin︰ | China |
|
|
|
|
|
|
|
|
DC50C Series
Product Appearance
  
T sub-series(2phase) S sub-series(3phase) A sub-series(3phase)
Specifications
| NO. |
Item |
Specs |
| 1 |
Dimension and weight |
103.5mmx107mmx64mm;480g |
| 2 |
External diameter of outlet |
1/2" threaded（M20） |
| 3 |
External diameter of inlet |
1/2" threaded（M20） |
| 4 |
Driving mechanism |
Brushless, magnetic separation |
| 5 |
Material of pump shell |
ABS,PES/SPS/PPS/PA66+30%GF (Optional) |
| 6 |
Condition of use |
Can continuously work, submersible or land use (not self-priming) |
| 7 |
Suitable medium |
Water, oil, or normal acid/ alkaline liquids
(Pre-test needed for special liquid) |
| 8 |
Max working temperature |
60℃(for T sub-series) or 100℃(for S/A sub-series) |
| 9 |
Power consumption |
2.5W~45.6W(for T sub-series) or 2.5W~86.4W(for S/A sub-series) |
| 10 |
Rated voltage |
12Vdc or 24Vdc |
| 11 |
Working voltage range |
5Vdc ~ 12Vdc or 5Vdc ~ 24Vdc |
| 12 |
Max load current |
2.1A (for T sub-series) or 3.8A(for S/A sub-series) |
| 13 |
Max horizontal flow rate |
36L/MIN(for T sub-series) or 41L/MIN(for S/A sub-series) |
| 14 |
Max static lift |
4M(for T sub-series) or 6.5M(for S/A sub-series) |
| 15 |
Noise class |
IP68(suitable for submersible installation) |
| 16 |
Waterproof class |
Can be more than 30,000hrs |
| 17 |
Life span |
Can be suitable solar panel, batteries, source adapter or other power module |
| 18 |
Power supply |
Water protection, dry-run protection, stall protection, stuck protection
(functions are optional for customization) |
| 19 |
Protection function |
Speed adjustable by PWM signal, 0~5V analog signal or potentiometer (functions are optional for customization) |
| 20 |
Power regulation function |
IP68(suitable for submersible installation) |
Features
- Small size, high efficiency, maintenance-free, low consumption, strong anti-jamming ability, stable performance
- Brushless with no pollution, adopts high-performance ceramics shaft and high-precision carbon fiber sleeve together (stainless steel shaft optional for reducing cost)long life span
- Stator and control circuits are completely sealed by epoxy resin completely separated with rotor, waterproof, avoided water-leakage problem which long exists in normal DC motor pump products
- Protection functions can be customized such as lock protection, dry-run protection and so on.
- Wide range of working voltage; parameters can be adjustable, e.g. 12VDC pump can have lift of 1m and lift of 3m with the same pump body.
- For A/S sub-series,soft-start without impact,can be directly powered by solar panel; circuit parts and motor parts completely separated, no electronic components inside pump body; pump body is made of high-temperature-resistant material, so pump can continuously work at fluid with high temperature (as high as 100C); have several protection functions, such as impeller&rotor lock protection, polarity reverse-connected protection, over-load protection, over-current protection, etc.
- For A sub-series, it's easy to regulate the power/speed of pump via PWM signal/ 0~5V analog signal/ potentiometer; flow rate & lift can be smoothly adjusted
- Reduced the mortality to 0.05% after long-time study by R&D dep.
- Lift of pumps can be doubled when they are connected in series
- Suitable for submersible installation or land use (should be located below fluid level)
- Offer ODM serve for pump and other controller system
Electrical parameters (only for reference，parameters can be customized for specific requirements)
| Model No. |
Voltage |
Max load current |
Max static lift |
Max flow rate |
Power consumption |
| V(dc) |
A |
M |
L/H |
w |
| DC50C-1220T |
12 |
1.57 |
2.00 |
1300 |
18.8 |
| DC50C-1220S |
| DC50C-1220A |
| DC50C-1230S |
12 |
3.0 |
3.00 |
1700 |
36.0 |
| DC50C-1230A |
| DC50C-1240S |
12 |
3.8 |
4.00 |
2150 |
45.6 |
| DC50C-1240A |
| DC50C-2430T |
24 |
1.5 |
3.00 |
1700 |
36.0 |
| DC50C-2430S |
| DC50C-2430A |
| DC50C-2440T |
24 |
1.9 |
4.00 |
2150 |
45.6 |
| DC50C-2440S |
| DC50C-2440A |
| DC50C-2450S |
24 |
2.9 |
5.00 |
2300 |
69.6 |
| DC50C-2450A |
| DC50C-2465S |
24 |
3.6 |
6.50 |
2450 |
86.4 |
| DC50C-2465A |
| NOTE |
- Information including continuous working time, working temperature and medium is required to be pre-confirmed with professionals; pump cannot work with high temperature or corrosive fluids.
- When pump is connected into circulation system, load current will be reduced to 70~85% of Max working current (opening outlet current).
- The head means the Max vertical lifting height of water,the flow is 0L/MIN@max head.
- The max flow rate means flow rate with no lifting height(according to the curve bellow)
|
Difference between 2phase & 3phase brushless DC pump
2phase
(T sub-series) |
- Hall sensor driving, circuit board should be placed inside pump body
|
3phase
(S/A sub-series) |
- NOTE that 3phase dc is completely different with 3phase AC; 3phase DC means 3 pairs of magnetic polarity & sensor-less, power supply the same with common DC pump(two wires: positive and negative)
- Intelligent program-driving, sensor-less, circuit can be put outside of pump body (main factor that pump can be high-temperature resistant)
- Speed adjustable by PWM, 0~5V signal or potentiometer(optional)
- Lock protection,reverse-connected protection, over-vol.&over-current protection, over-temperature protection
- Soft start, no current impact, can be contact directly with solar panel
|
Diagram of 3phase brushless DC pump connection
 
S-Series A-Series
Potentiometer Speed adjusting connection:
Contact the red and black wire to both ends of potentiometer(variable resistor),then contact the yellow wire to the middle of potentiometer,Speed canbe changed by turning the potentiometer. Potentiometer speed adjusting is the same with VR speed adjusting(Remove the potentiometer and contact the speed adjusting wire like VR speed adjusting connection bellow).
PWM(50-800HZ/Amlitude 5V) or VR(0-5V) Speed adjusting connection:
Contact the yellow wire to the control system's speed control signal output interface(PWM or VR) and contact the black wire to the ground lead in the control system.hang the red wire on the air.
Flow rate-lift Curve
Dimensions of pump
Selection guide
| Model |
Voltage
(DC) |
Current range |
Max lift |
Max flow |
Inlet Dimension |
Outlet Dimension |
Speed regulation function |
Dry-run / Lock protection |
| DC30A |
5~12V |
0.1~0.35A |
3m |
4L/MIN |
8mm |
8mm |
customized |
Optional |
| DC40 |
6~24V |
0.15~1.2A |
8m |
11L/MIN |
14mm |
10mm |
PWM/0~5V/manual |
Optional |
| DC40A |
6~24V |
0.15~1.2A |
6m |
14L/MIN |
14mm |
14mm |
PWM/0~5V/manual |
Optional |
| DC40C |
6~24V |
0.15~1.2A |
6m |
15L/MIN |
1/2’’ thread |
1/2’’ thread |
PWM/0~5V/manual |
Optional |
| DC40F |
6~24V |
0.15~1.2A |
6m |
16L/MIN |
1/2’’ thread |
1/2’’thread |
PWM/0~5V/manual |
Optional |
| DC40H |
6~24V |
0.15~1.2A |
11m |
7.5L/MIN |
11mm |
8mm |
PWM/0~5V/manual |
Optional |
| DC50 |
6~24V |
0.15~3.8A |
7m |
44L/MIN |
22mm |
22mm |
PWM/0~5V/manual |
Optional |
| DC50A |
6~24V |
0.15~3.8A |
5m |
60L/MIN |
27mm |
27mm |
PWM/0~5V/manual |
Optional |
| DC50B |
6~24V |
0.15~3.8A |
13m |
30L/MIN |
22mm |
22mm |
PWM/0~5V/manual |
Optional |
| DC50C |
6~24V |
0.15~3.8A |
6.5m |
42L/MIN |
1/2’’ thread |
1/2’’ thread |
PWM/0~5V/manual |
Optional |
| DC50D |
6~24V |
0.15~3.8A |
6.5m |
42L/MIN |
20mm |
20mm |
PWM/0~5V/manual |
Optional |
| DC50E |
6~24V |
0.15~3.8A |
15m |
25L/MIN |
1/2’’ thread |
1/2’’ thread |
PWM/0~5V/manual |
Optional |
| DC50F |
6~24V |
0.15~3.8A |
15m |
25L/MIN |
1/2’’ thread |
1/2’’ thread |
PWM/0~5V/manual |
Optional |
| DC50G |
6~24V |
0.15~3.8A |
18m |
10L/MIN |
14mm |
8mm |
PWM/0~5V/manual |
Optional |
| DC50K |
6~24V |
0.15~3.8A |
14m |
25L/MIN |
14mm |
14mm |
PWM/0~5V/manual |
Optional |
| DC50W |
24V |
1~3.8A |
wave |
28000L/H |
Submersible |
58mm |
Variable Frequency |
Optional |
| DC50Q |
24V |
1~3.8A |
5m |
5000 L/H |
1’’ thread |
1’’ thread |
Variable Frequency |
Optional |
| DC60Q |
24v |
1-5A |
5m |
10000L/H |
1.2’’ thread |
1.2’’ thread |
Variable Frequency |
Optional |
Note:
1, lift and flow rate of product can be customized
2, dimension of inlet/outlet, speed adjusting method and control system can be customized.
3,Food grade and mute pump can be customized. |
|
|
|
|
| Payment Terms︰ | TT/PAYPAL/WESTERN UNION |
|
|
Product Image
|
|
|
Related Products
|
|
|
|
|
|
|
|
|
