Information
Dimension and weight: 93.9mm*99.5mm*69.6mm, 0.48kg
External Diameter of Inlet/Outlet: 20mm(thread)
Head:0-15m
Flow rate: 0-1560L/H
Driving Mechanism: Brushless, magnetic separation
Life span: 30000hrs
Noise: ≤35dB(A)
Waterproof level: IP68
Max. working temperature: -30℃-100℃
Suitable medium: water, oil, normal acid/alkaline(tested needed for special liquid)
Speed adjustable(Optional): PWM/0-5V analog signal/potentiometer
Constant power output: For example, a 12V(24V) 10W pump uses 12-18V(24-30V), the power is still 10W, and it can run continously.
Application
![DC50D1](https://www.dcpump.com/uploads/DC50D1.jpg)
Water heating, Intelligent toilet without water tank, and other need for pressurizing and circulating refrigeration equipment
1
|
Product model: |
DC50E-12110PWM
DC50E-12110VR
DC50E-12110VS
DC50E-12110S
|
DC50E-24150PWM
DC50E-24150VR
DC50E-24150VS
DC50E-24150S
|
PWM:PWM speed regulation
VR:potentiometer speed regulation
VS:0~5V Analog voltage signal speed regulation
S:Fixed speed
|
2
|
Rated Voltage: |
12V DC
|
24V DC
|
|
3
|
Working voltage range: |
10-18V
|
10-30V
|
The pump can out put constant power when the voltage is higher than rated voltage. |
4
|
Rated Current: |
2.7A(4.5A)
|
2.1A(3.6A)
|
Closed outlet current(open outlet current) |
5
|
Input Power: |
32W(54W)
|
60W(83W)
|
Closed outlet power(open outlet power) |
6
|
Max. Flow rate: |
1320L/H
|
1560L/H
|
Open outlet flow |
7
|
Max. Head: |
11M
|
15M
|
Static lift |
8
|
Min. power supply: |
12V-2A
|
24V-2A
|
|
1
|
Jam protection |
When jam it will Stop to protect itself |
|
2
|
Dry run protection |
The pump will Stop(8S) and start(2s) repeatedly to protect itself(can be customized) |
|
3
|
Overloading protection |
When the voltage exceeds the rated power, the pump will stop |
|
4
|
Reverse protection |
Wrong connection of the power supply(positive and negative), the water pump will stop running, and then re-connected, can work normally. |
|
|
Controller Internal install
|
![DC50D2](https://www.dcpump.com/uploads/DC50D2.jpg) |
Suitable for external installation |
|
Controller External install
|
![DC50C3](https://www.dcpump.com/uploads/DC50C3.jpg) |
Suitable for high temperature or Corrosive liquid submersible installation |
Flow Rate Curve
![DC50E](https://www.dcpump.com/uploads/DC50E.jpg)
Dimension
![DC50E2](https://www.dcpump.com/uploads/DC50E2.jpg)
![sadadzxcxz](https://www.dcpump.com/uploads/sadadzxcxz.jpg)
How To Choose A Right Pump For Your System?
1. Confirm your operating voltage, current, head, flow, and the size of inlet & outlet. In general, there is no flow when the head achieve the maximum head marked by factory. So if you require the pump is able to meet a certain height and also meet a certain flow, you should choose a higher maximum head than you need. Please consult us or refer to the performance curves.
2. Confirm the shape requirements, such as the type of interface, the direction of inlet & outlet, etc.
3. Confirm the working environment, such as the temperature, the medium, etc.
4. Confirm the functional requirements, such as the time control, the flow control, the speed control, etc.
5. Please feel free to contact us if you have any questions need our help during choose the pump.
6. We own our moulding factory, have the ability and capacity to open the mould, so if your system needs special model, we can provide ODM/OEM service for you.
And highly welcome OEM/ODM!
Installation
![asvqwvs](https://www.dcpump.com/uploads/1420fbe0.jpg)
Note: The pump is not self-priming pump. When install it, please make sure there is enough water in pump body. Meanwhile, the pump must be installed below the liquid level in the tank.